\documentstyle[a4,12pt]{article}
\begin{document}
\author{Hamish Dewar}
\title{ECCE}
\maketitle
\parskip .1 in
\setcounter{secnumdepth}{10}
\parindent 0in

\section{Preamble}
\hspace*{1.1 in} E C C E \hspace{0.2 in} F O R \hspace{0.2 in} V I D E O S


\hspace*{0.2 in} This version of ECCE combines the capabilities of a conventional
context editor with many of the features of a screen editor. It is
available on EMAS and VAX/VMS as well as the APM.

\hspace*{0.2 in} The APM version does not at present include Spelling checking (Q),
syntax checking (\%Ci), or built-in help (\%H).
\\ \hspace*{2.7 in} Hamish Dewar April 1983


\section{INTRODUCTION TO TEXT EDITING}

ECCE is a text editor. Under the control of commands entered from a
terminal keyboard, it carries out modifications to a body of text held
in a computer file. This text file may be, for example, a source
program in some high-level language, or tables of results generated by a
statistical package, or data intended as input to a user's program; it
may simply be material which is held in the computer filing system
solely for the purposes of editing and listing. The differences between
these kinds of text files are not in any way significant to the
operation of the Editor. What ECCE cannot do is edit files which are
not composed of lines of text, such as executable code files.

\subsection{Text files}

A text file consists of a number of lines, each line containing a
number of characters. The characters making up a line are either
printing characters or space characters. There is no need when typing
in lines on a computer terminal, any more than on a conventional
typewriter, to 'space' after the last printing character on a line, in
order to pad lines out to a particular fixed length; RETURN suffices to
mark the end of the line. The Editor regards lines as being of variable
length, usually ending with the last printing character. Hence 'white'
space at the right-hand end of a line is not part of the line, in the
way that space at the left or within the line is, being made up of
individual space characters (corresponding to depressions of the
space-bar).

Although these make no impact on the printed page or video screen, they
are just as significant for editing as other characters. For example,
the line:

\hspace*{0.2 in} longing \hspace{0.2 in} for those wide open \hspace{0.4 in} spaces

would look like this if the spaces were replaced by ampersands:

\&\&\&longing\&\&\&for\&those\&\&wide\&open\&\&\&\&\&\&spaces

\hspace*{0.2 in} A blank line is an empty line; that is, it contains no characters,
not even spaces. Blank lines are just as significant for editing as
other lines.

\hspace*{0.2 in} The main function of the Editor is to enable the terminal user to
make alterations to a file held within the computer system, but it may
also be used to create a new file from scratch or simply to inspect a
file without altering it.

\subsection{The file pointer}

The operation of the Editor is directed by a series of commands which
are carried out one after the other in the order typed. The effect of
most commands depends partly on the position of a notional pointer which
identifies the 'current position reached' in the file. Initially the
file pointer is positioned at the start of the first line in the file.
It may be moved along lines and down from one line to the next. It may
be positioned at the start of any line, between any two characters on a
line, or at the end of a line. It may also be positioned at the very
end of the file, that is, after the last line of text.


Many commands have no effect other than that of re-positioning the
file pointer. The usual direction of movement is forwards, that is,
from left to right along a line and downwards from one line to the next,
but there are also commands which move the pointer backwards in the
file. Commands which simply move the file pointer around will be called
location commands; commands which actually change the material in the
file will be called alteration commands. The typical pattern of use of
the Editor is to go progressively through the file, using whatever
location commands are most convenient to reach the next point at which a
correction is required, and then use one or more alteration commands to
effect the correction.

\subsection{Feedback}

ECCE commands are usually typed on-line, that is, in interactive
mode. After the execution of each complete command, some feedback is
provided to the user. This enables the user to confirm whether the
command has had the effect intended, before issuing the next command.

The nature of the feedback depends on whether the Editor is being
used from a hard-copy (printing) device or from a video terminal. As
editors are increasingly being accessed in the latter way, the emphasis
in most of this document is on that case. It is hoped that users of
hard-copy devices (or videos used as hard-copy devices) will be able to
ignore or re-interpret parts of the description which are not relevant
to this mode of access.

\subsubsection{Video feedback}

In the case of videos, feedback is in the form of a 'window'
displaying a group of consecutive lines in the file. As successive
commands are executed, the window is updated so that it always includes
the current line and so that the position of the pointer is indicated.
Unfortunately video terminals vary considerably in terms of their
capabilities and the way they are controlled. In consequence the
fashion in which the window is updated and the pointer is displayed
varies from terminal to terminal, and a particular implementation of the
Editor will support only a particular selection of video terminals;
others may have to be used as if they were hard-copy devices.

The size of the window used for video feedback varies between a
minimum and maximum number of lines, within a screen region which may be
specified by the user. Whenever editing moves to a fresh site in the
file, the display is completely re-written, with a minimum size window.
Moving off the bottom or top of the window causes the window to be
extended, when this is possible.


A line which exceeds the window width is truncated rather than
wrapped round on the display. The invisible characters can still be
edited.

For purposes of printing or display, the end of the file is shown as
an extra line, beyond the last genuine line, in the form:

\hspace*{1.1 in} **END**

This line does not actually exist in the file and therefore cannot be
edited.

\subsubsection{Hard-copy feedback}

In the case of printing terminals (or videos used as hard-copy
devices), the feedback consists of printing out the current line, with
the position of the file pointer indicated by insertion of a circumflex
character (up-arrow on some terminals). However, this extra character
is not included when the pointer is at the start of the line.

\small\tt \begin{verbatim}Thus:      here the file pointer is splitting ha^irs
and:       here it is at the end of the line^
but:       here it is at the start of the line
\end{verbatim}\rm  \normalsize 
With slow terminals, it can be excessively time-consuming if the current
line is printed out after every command is executed and there are
options which may be selected to reduce the frequency of output.


\subsection{Editing modes}

There are two modes in which the Editor may be used from a video
terminal, and the user may switch freely between them. They are command
mode and data-entry mode. In command mode, the ordinary printing keys
are used to enter strings of characters to be interpreted as editing
commands; in data-entry mode, these keys are used to enter text as part
of the file. In the latter mode, the actual video cursor indicates the
position of the Editor's file pointer, by highlighting the character
immediately to the right of the pointer; (recall that the Editor's
pointer is understood to lie between a pair of characters).


However, in command mode (in most implementations), the actual video
cursor is pre-empted for use in the command region of the screen and a
variety of alternative means are used to indicate the position of the
Editor's file pointer within the file region. This may be in the same
form as the video cursor but the choice is limited by terminal
capabilities. Often reduced or increased intensity has to be used; in
this case, a vertical bar is displayed if the character to the right of
the pointer is a space or the pointer is at the end of the line. For
terminals lacking the capability to highlight an arbitrary character
position in any way, the pointer is shown as a circumflex (or other
marker character) temporarily overwriting the character to the left of
the pointer, and an extra column is added at the left of each line for
use when the pointer is at the start of the line.

\subsection{Control keys}

It is part of the philosophy of ECCE that all the editing commands
should be accessible from any terminal, using just conventional printing
characters and the line-terminator RETURN. No assumption is made about
the availability of special control keys on the terminal keyboard.

However, where a terminal is fitted with special keys, such as cursor
controls, function keys, or switchable numeric pad, these keys are
usually available as more convenient ways of entering frequently
required commands. Alphabetic keys used in conjunction with the CONTROL
shift available on most terminals may also be used in this way. All
such keys, or key combinations, will be referred to as control keys.
The particular advantage of control keys is that they are immediate in
their effect; they do not require a following RETURN.

Technically, these keys are MACROS. Macros are described in detail in a
separate section but the basic principle is that a single key can be
made to stand for an arbitrary command or command sequence. Initial
definitions for some of the keys are pre-set on entry to the Editor; the
interpretation of these may be freely altered, and others defined, at
any time. This is part of a general capability to extend the repertoire
of the Editor by means of user-defined commands.

Because of the fact that the interpretation of control keys is not
fixed and because of the considerable variation in what is available on
different terminals, it is not possible to provide an enumeration of
their functions here, despite the fact that they often provide the most
convenient access to certain editing facilities.

One control key which is always available is RETURN, which when used by
itself in command mode is defined to cause a Move to the next line in
the file. If cursor control keys are available, these will in general
be associated with the Editor commands Cursor Up, Cursor Down, Cursor
Left and Cursor Right. In many implementations the LF key is defined to
cause repetition of the last command and the TAB key to cause a move to
the next word in the file.

It should be noted that the possibility of using control keys depends
on appropriate support being available in the terminal handling
software, so that they may not be usable in all modes of connection. In
addition, some control keys have a reserved significance for the
operating system and it is advisable to find out what these are sooner
rather than later.

One function which, as an exception to the general rule, cannot be
invoked except by a control key is that of switching between command
mode and data-entry mode. The restriction is solely to ensure that if
data-entry mode can be entered, it can be left, since in data-entr left,
since in this mode, none of the printing characters has a command
significance.

The key enquiry command (\%Q) which is described in the section on
MACROS provides a means of investigating the significance of both
control and ordinary keys.


\section{ADVICE FOR BEGINNERS}

To begin with, the Editor will seem a clumsy tool, particularly for
those with limited typing experience. Changes which could be marked up
on a document in no time take an age to translate into sequences of
editing commands to achieve the desired effect. Fluency comes with
practice, although editing remains a fiddling business, and mistakes are
inevitable. Happily most mistakes are easily recovered from, and in the
exceptional case where an edit goes disastrously wrong (for example
unintentionally scrambling half the file), the editing session can
always be abandoned without losing the original file, so that only the
editing time is wasted.

With experience, it becomes quite straightforward, and habitual, to
edit a file 'sight unseen'. However, for initial learning, it is
sensible to use as test data a file with known contents.

The following procedure is a possible learning programme:

\small\tt \begin{verbatim}(a)  Beg or borrow a copy of some text file for experimentation.
     A suitable length is 30 to 100 lines of text.

(b)  Obtain a printer listing of the file.

(c)  At the terminal give the appropriate command to call the Editor to
     edit the test file (see next section).

(d)  Use the %Q command to explore the significance of the individual
     keys, particularly any control keys.

(e)  Initially use only the location commands to move about the file
     without altering it in order to gain familiarity with the effect of
     these commands in detail.

(f)  Mark up the listing of the file with a few typical 'corrections'.

(g)  Move back to the top of the file and start applying the corrections
     one by one from beginning to end.

(h)  When all the corrections have been applied, close off the edit.

(i)  Obtain a printer listing of the revised file for re-assurance that
     the corrections have really taken effect.
\end{verbatim}\rm  \normalsize 
There are quite a number of individual commands in ECCE, and each has
some utility in particular cases. But there are only seven or eight
which have a high frequency of use and indeed all editing can be done in
terms of these. To begin with it is recommended that attention is
confined to the following commands:

\small\tt \begin{verbatim}          Move (and Move back)   \
          cursor movement         \ or control key
          Get and Kill            /    equivalents
          Insert and Erase       /
          Find
          Substitute
\end{verbatim}\rm  \normalsize 
When these have been mastered, others can be added to the repertoire as
the need for them is felt. There are often several ways of achieving
the same effect with the Editor. The experienced user usually chooses
one that involves least typing, but agonising over the choice can waste
more time than is saved.

\section{CALLING THE EDITOR}

\small\tt \begin{verbatim}   (a) To edit an existing file called "CURTEXT" so that the new file
       created will also be called "CURTEXT":
               VECCE CURTEXT
       This is the standard updating procedure.

   (b) To edit an existing file called "OLDTEXT" in such a way as to
       create a new file called "NEWTEXT":
               VECCE OLDTEXT/NEWTEXT

   (c) To create a new file called "PROG34" from scratch:
               VECCE .N/PROG34
       The ".N" stands for a null file, so that technically this is a
       special case of (b) above starting with an empty old file.  The
       first editing command when creating a new file would normally be
       "G*" (see Get below)

   (d) To inspect an existing file called "RESULTS" without altering it:
               VECCE RESULTS/.N
       Again this is a special case of (b) with a null new file.
       Alteration commands are dis-allowed in this mode of operation.

   (e) To edit an existing file "PROG" together with a secondary input
       file "SPECS" in order to create a new file "FULLPROG":
               VECCE PROG,SPECS/FULLPROG
\end{verbatim}\rm  \normalsize 
In all cases where reference is made to a new file being created, the
effect is to supersede any existing file of the same name, whether that
file has been specified as an input to the Editor or not.

\small\tt \begin{verbatim}   (f) examples including option specifiers:
               VECCE CURTEXT-MINWIN=12-WTOP=6
               VECCE CURTEXT-NOMATCH-PRE=WPCOMMANDS
\end{verbatim}\rm  \normalsize 
\subsection{Old and new files}

While it is natural to speak of using the Editor to alter or modify a
file, it is important for some purposes to understand that the Editor
does not literally modify an existing file. What it does is produce a
completely new file from the old one. Each editing session creates a
fresh file, though in most cases the bulk of the material in it is
copied verbatim from the old one. Very typically, at the conclusion of
an editing session, the new file created supersedes the old one, so that
the file-name which previously designated the old file now designates
the new one.

In this typical case, the effect is similar to what would happen if
the Editor did actually alter the old file. However, the following
consequences indicate why it is necessary to make the distinction:


\small\tt \begin{verbatim}    (a) if an editing session is abandoned, rather than being
        terminated normally, no new file is created and the
        old file remains unaltered;

    (b) the Editor can be called in such a way that the new file
        is given a different name from the old file so that the
        old also continues in existence at the end of the editing
        session;

    (c) on systems which automatically preserve earlier generations
        of like-named files, the old file also survives (though an
        earlier version may be purged).
\end{verbatim}\rm  \normalsize 
\subsection{Secondary input}

The requirement often arises to incorporate into one file part or all
of another file. Many computer systems provide a command to handle the
particular case of concatenating complete files, either through the
provision of a special utility program or as an option within a Copy or
Transfer utility. The secondary input facility in ECCE provides a more
general capability.

In general terms the facility permits the user to switch from the
main file to an alternative file and there select portions of that file
to be incorporated into the file being edited.

The file to be used for secondary input is nominated at the time the
Editor is called, along with the old and new file-names. Alternatively,
the file to be used can be specified in the course of the edit, by means
of the "\%S" command.

\subsection{File-names and options}

Up to three file-names may be given when calling the Editor: the name
of the file to be edited, the name of a secondary input file, and the
name to be given to the edited file when the editing session is closed.
These parameters have to be presented in the call command in the order
just given.

In addition it is possible when calling the Editor to select A number
of Options which control or qualify the fashion in which the Editor
operates, for example, what size of display window it is to use. Some
option parameters have variable values (such as the height of the
window) and others are simply selectors (such as whether
case-distinctions are to be treated as significant when matching letters
of the alphabet). Options are introduced by a qualifier symbol and a
keyword; for a parameter with a variable value, this is followed by an
equals-sign and a value. Examples of complete option specifications,
using the dash (minus) as the qualifier symbol, are "-MINWIN=12" and
"-MATCH". Some of these options may also be varied during the course of
the edit by means of the Environment command ("\%E").


\section{COMMAND FORMATS}

When the Editor is called, it positions its file pointer at the start
of the first line in the file to be edited and presents the initial
display. At the outset, it is in command mode and expects command input
to be typed on the command line. The response may take one of three
forms:

\hspace*{0.5 in} typing a command line followed by RETURN
\\ \hspace*{0.5 in} typing a Special command followed by RETURN
\\ \hspace*{0.5 in} pressing a control key (including plain RETURN)

A command line consists of one or more editing commands, optionally
separated by spaces. A command line is terminated by RETURN and errors
noticed while typing it may be cancelled by means of the DEL key.

\subsection{Special commands}

Special commands are distinguished by starting with the prefix "\%"
(percent-sign) followed by a letter. They are used to select options
and set modes which modify the effect of subsequent editing commands.
The most essential Special command is the Close command "\%C" which is
used to close off the edit. The Special command "\%H" (for Help)
provides general Help information on the Editor and its use, and the
Special command "\%Q" (for Query) allows the user to explore the
significance of individual keys. Details of the Special commands are
given in the major sections SPECIAL COMMANDS and MACROS.

\subsection{Control keys}

Where a control key has been defined as a command, the effect of
pressing the key is effectively the same as if the command sequence for
which the key stands had been typed in followed by RETURN. Note,
however, the important difference mentioned under 'repetition'. RETURN
by itself counts as a control key with the fixed significance of M
(Move).

One control key has the effect of switching between command mode and
data-entry mode. In data-entry mode, only control keys (including
RETURN) can be interpreted as commands, since any printing characters
and spaces typed in this mode are treated as data to go into the file,
overwriting any text already present at the current position.

\subsection{Command types}

There are just two formats for individual editing commands, one for
those commands which are accompanied by a text string as parameter and
one for those which are not.

A command which has no text parameter takes the form of a single
character or a single character followed by a minus sign. For most
commands the single character is a letter, which is mnemonic for an
imperative verb. For example, the Move command is denoted simply by "M"
(or "m") and the Move back command by "M-" (or "m-").

A command with a text parameter takes the form of a single letter (or
letter followed by minus) followed by whatever string of characters the
user wants to specify, enclosed within delimiter characters. For
example, "F/cat/" is an instance of the Find command with "cat" as its
parameter, and "S.dog." is an instance of the Substitute command with
"dog" as its parameter.

The user has a choice of several characters for use as delimiters; the
oblique stroke and the period illustrated above are popular because of
typing convenience, but any character which has no defined significance
to the Editor may be used. The opening and closing delimiter for any
one parameter must be the same, and the delimiter must be chosen to be
distinct from any of the characters which require to be included in the
text string. Strings may include any printing characters and spaces,
but not line-breaks.

The commands which take a text parameter fall into two groups:
text-matching commands and text-insertion commands. There is some
relaxation of the format rules for the parameters for the latter
(Insert, Overwrite, Substitute and Get); details are given in the
description of the Insert command.

There are a number of alternative ways of specifying a text parameter:

\hspace*{0.3 in} by one of the six text parameter macro letters (X,Y,Z,x,y,z);
\\ \hspace*{0.3 in} by the ditto symbol(");
\\ \hspace*{0.3 in} by the exclamation-mark (!).

The first of these is described in the section on Command and Text
Macros.
The ditto symbol indicates that the text string to be used is the same
as the last string used in a command of the same group (matching or
insertion).
Using an exclamation-mark in place of a text string indicates that the
actual text to be used is not provided within the command, but is to be
requested at the time the command is executed. In this case, when the
text is requested, it should be typed without delimiters and terminated
by RETURN. (For the interpretation of exclamation-mark within command
macro sequences, see MACROS).

\subsection{Case distinctions}

In commands, the upper-case letters 'A' to 'W' have a fixed
significance as basic editing commands. Initially the lower-case
letters 'a' to 'w' have the same meaning as their upper-case
counterparts, but this is not fixed and may be changed by re-definition
as command macros. The letters 'X' to 'Z' and 'x' to 'z' have no fixed
significance to the Editor and are available for definition as text or
command macros.

Within text strings, case distinctions are always significant for
insertions, but are normally ignored for text matching purposes, so
that, for example, the string "the" would be considered to match "The"
as well as "the" (not to mention "tHe" and so on). However, there is an
Option (NOMATCH) which may be selected to prevent this indiscriminate
matching.

\subsection{Multiple commands}

When more than one command is typed on a line, they may be, but need
not be, separated by spaces. The commands are executed in order from
left to right. One point of putting several commands on one line is to
control the frequency of feedback. Another is to produce a useful unit
for repetition.

\subsection{Syntactic errors}

Before proceeding to execute a command line, the Editor checks that
the format of each command in it is correct, for example, that a text
matching command is accompanied by a text parameter. If not, an error
report is made indicating the nature of the error and no attempt is made
to execute any of the commands making up the line. Note the contrast
between the treatment of this kind of error and the effect of failures
in executing well-formed commands.

\subsection{Failure conditions}

The specification of the individual commands defines not only what
happens when the command is carried out but the condition under which
the command cannot be carried out -- the failure condition. In the
simple case, a failure in command execution counts as an error and a
report is made. Any subsequent commands in a command sequence are not
executed, but the effect of any earlier commands in a command sequence
is not undone, nor that of successfully completed cases of a repeated
command. There may also be partial execution of the failing command
itself, as defined in the individual descriptions which follow. Failure
conditions can be utilised to control command execution in a number of
ways, of which the most important is mentioned in the next paragraph.

For a few commands, mainly those represented by a character other
than a letter, there is no failure condition.

\subsection{Repetition numbers}

Any command may be followed by a repetition number (a decimal
integer) indicating that the command is to be repeated the number of
times specified. For example, "M5" means Move five times, and "I/ /20"
means Insert a space twenty times, that is, in effect, insert twenty
spaces. An asterisk may be used in place of a repetition number with
the significance: repeat the command until it fails. For typing
convenience, the digit zero may be employed in place of an asterisk.
For example, the command "E*" (or "E0") means Erase repeatedly until the
failure condition for Erase is met, that is, Erase up to the end of the
line.

\subsection{Repetition of last command}

Instead of typing in a new command at any point, the user may instead
type simply a repetition number. This causes the last genuine command
line to be executed again the number of times specified. The whole
command line, which may consist of a sequence of several commands, is
repeated. In this context, neither Special commands nor control key
commands count as genuine command lines, nor do they cause the last
genuine command to be lost (although some Special commands may cause the
record of it to be erased from the screen).

The control key Linefeed is generally defined to have the
significance of repeating the last command once.


\section{INDIVIDUAL EDITING COMMANDS}
\subsection{Move (forward one line) M}

 The Move command causes the file pointer to be moved from its current
 position to the start of the following line.

\hspace*{0.3 in} Attaching a repetition number to a Move command provides a means
\\ \hspace*{0.3 in} of moving forward a fixed number of lines. For example, the
\\ \hspace*{0.3 in} command "M99" issued at the start of the file, causes the pointer
\\ \hspace*{0.3 in} to be moved to the start of the hundredth line in the file.

 The command fails if the file pointer is at the very end of the file,
 that is, beyond the last line of text.

\hspace*{0.3 in} It is legitimate to Move from the last line in the file to the
\\ \hspace*{0.3 in} end-of-file position, but then further Moves will fail.

\subsection{Move back (one line) \hspace{0.3 in} M-}

 This command causes the file pointer to be moved from its current
 position to the start of the previous line.

 The command fails if the current line is the first line in the file,
 the pointer being moved nonetheless to the start of this line.

\subsection{Cursor Down \hspace{0.9 in} \}}

 This command is similar to the Move command, except that the pointer is
 moved to the column position in the following line corresponding to its
 position in the current line.

\hspace*{0.3 in} The command is typically the definition of a cursor control key.
\\ \hspace*{0.3 in} With this and the other cursor movement commands, the resulting
\\ \hspace*{0.3 in} line position may be beyond the end of the line (that is, to the
\\ \hspace*{0.3 in} right of the last printing character). This is often a temporary
\\ \hspace*{0.3 in} state en route to another position, and so the fact that the
\\ \hspace*{0.3 in} cursor is out in space does not of itself imply any extension of
\\ \hspace*{0.3 in} the line, but if any text is entered in this situation, the gap
\\ \hspace*{0.3 in} between the existing end of the line and the file pointer is
\\ \hspace*{0.3 in} first filled with spaces.

 The command fails when the file pointer is on (or beyond) the last line
 of the file.

\subsection{Cursor Up \hspace{1.1 in} \{}

 This command is similar to the Move Back command, except that the
 pointer is moved to the column position in the previous line
 corresponding to its position in the current line.

\hspace*{0.3 in} See the notes on Cursor Down (above)

 The command fails when the file pointer is on the first line of the
 file, and the pointer does not move.

\subsection{Right-shift (one char) \hspace{0.2 in} R}

 This command causes the file pointer to be moved right one character
 position.

 The command fails if the file pointer is at or beyond the end of the
 current line.

\hspace*{0.3 in} Hence "R*" takes the pointer from anywhere within the line to the
\\ \hspace*{0.3 in} right hand end of the line.

\subsection{Left-shift (one char) \hspace{0.3 in} L}

 This command causes the file pointer to be moved left one character
 position.

 The command fails if the file pointer is at the start of the current
 line.

\hspace*{0.3 in} Hence "L*" takes the pointer from any position to the start of
\\ \hspace*{0.3 in} the line.

\subsection{Cursor Right \hspace{0.9 in} $>$}

 This command is similar to the Right-shift command except that it
 permits the file pointer to be moved beyond the end of the line, that
 is, beyond the rightmost character on the line.

\hspace*{0.3 in} See the notes on Cursor Down.

 The Cursor Right command fails if the file pointer is at or beyond the
 maximum line length defined by WIDTH.

\subsection{Cursor Left \hspace{0.9 in} $<$}

 The Cursor Left command is identical in effect to the left-shift
 command. It is provided for reasons of symmetry.

\subsection{Find TEXT \hspace{1.1 in} F}

 The Find command causes the Editor to search forward in the file for
 the first occurrence of the specified text string. The search starts
 at the current position of the file pointer, except that an occurrence
 just at the file pointer which has already been matched, either by Find
 or by Uncover or Verify, is ignored.

\hspace*{0.3 in} For example, adding a repetition count to a Find command, as in
\\ \hspace*{0.3 in} "F/cat/3", will locate the third occurrence of the sequence
\\ \hspace*{0.3 in} "cat". The repetition does not have to be in the form of a count
\\ \hspace*{0.3 in} attached to the original command. For example, it is a common
\\ \hspace*{0.3 in} experience to discover, after a Find has been executed once, that
\\ \hspace*{0.3 in} the character sequence chosen in fact appears earlier in the file
\\ \hspace*{0.3 in} than the intended position. In this case the Find command can
\\ \hspace*{0.3 in} simply be repeated, by typing 1 as a repetition command, until
\\ \hspace*{0.3 in} the desired occurrence is reached.

 By default the search continues to the end of the file. The scope of
 the search may, however, be limited to a particular number of lines
 counting from (and including) the current line, by specifying the
 number of lines between the command letter and the quoted text.

\hspace*{0.3 in} For example, "F9/cat/" limits the scope of the search to the
\\ \hspace*{0.3 in} current line and the next eight.

 The command fails if there is no occurrence of the specified sequence
 of characters within the scope of the search. Where the scope is more
 than one line, the file pointer is moved to the start of the last line
 searched (end-of-file in the case of unlimited scope). Where the scope
 is one line, the file pointer is not moved.

\subsection{Find back TEXT \hspace{0.7 in} F-}

 The Find back command is similar in effect to Find except that the
 search proceeds backwards through the file. The number of lines to be
 searched may be specified between the minus and the text parameter; by
 default the search continues to the start of the file.

 The command fails if there is no occurrence of the specified text
 within the scope of the search, the file pointer ending up at the start
 of the last line searched.

\subsection{Traverse TEXT \hspace{0.8 in} T}

 The Traverse command causes the first occurrence of the specified text
 to be located and the pointer to be positioned at the right-hand end of
 the occurrence, rather than at the start as with Find. The search
 proceeds as for Find except that the default scope is confined to the
 current line and that an occurrence of text already matched is not
 ignored.

 The command fails if there is no occurrence of the text string within
 the scope of the search. Pointer movement in the case of failure is
 exactly as for Find.

\subsection{Verify TEXT \hspace{0.9 in} V}

 The Verify command neither moves the file pointer nor alters the
 content of the file. It succeeds if the sequence of characters
 immediately to the right of the file pointer matches the text
 specified; otherwise it fails.

\hspace*{0.3 in} The Verify command only has a use in conjunction with programmed
\\ \hspace*{0.3 in} commands (see the section on this topic).

\subsection{Delete TEXT \hspace{0.9 in} D}

 The Delete command causes the first occurrence of the specified text to
 be located and then deleted, leaving the file pointer at the site of
 the deletion. The search proceeds as for Find, except that the default
 scope is confined to the current line, rather than the rest of the
 file, and an occurrence of text already matched is not ignored.

 The command fails if there is no occurrence of the specified text
 within the scope of the command. Pointer movement in cases of failure
 is exactly as for Find.

\subsection{Insert TEXT \hspace{0.9 in} I}

 This command has the effect of inserting the text specified to the left
 of the file pointer. The text parameter which follows the letter "I"
 may take any of the following forms:

\hspace*{0.5 in} quoted text between delimiter characters
\\ \hspace*{0.5 in} a text macro letter ('X'-'Z' or 'x'-'z')
\\ \hspace*{0.5 in} the ditto character
\\ \hspace*{0.5 in} the exclamation-mark

 The last-mentioned case ("I!") provides a direct-entry capability for
 inserting a text string within a line. The text to be inserted is
 requested when the Insert command is executed, with the video cursor at
 the position of the file pointer. The normal way of terminating the
 text is with RETURN; if any other control key is used as a terminator,
 it causes the command sequence currently being executed to be abandoned
 and the control key to be treated as a new command. This applies also
 to the use of this form for the other insertion commands (Overwrite,
 Substitute, and Get).


\hspace*{0.3 in} For the direct-entry form, in most implementations, a certain
\\ \hspace*{0.3 in} amount of space is opened up at the position of the file pointer
\\ \hspace*{0.3 in} to permit the text to be typed in. Then when the terminating key
\\ \hspace*{0.3 in} is pressed, the line is closed up again. In some
\\ \hspace*{0.3 in} implementations, no space is opened up, and the line
\\ \hspace*{0.3 in} automatically accommodates each character as it is typed.

 For typing convenience, the Editor relaxes some of the syntactic rules
 for all the insertion commands (Insert, Overwrite, Substitute and Get),
 but not for the text matching commands. The closing delimiter in the
 case of quoted text may be omitted if the text string is the last thing
 in a command line and the exclamation-mark indicating the direct-entry
 case may be omitted provided that no ambiguity could arise (that is,
 provided the immediately following character is not one of the text
 macro letters).

\hspace*{0.3 in} Specifiying a repetition count with Insert is a convenient way of
\\ \hspace*{0.3 in} inserting multiple characters, typically spaces.

 Insert fails if adding the text would cause the part of the line to the
 left of the pointer to exceed the maximum line length (as defined by
 WIDTH).

\subsection{Overwrite with TEXT \hspace{0.4 in} O}

 The Overwrite command provides a means of replacing existing text on a
 one-for-one basis by new text. It differs from Insert in that one
 character is deleted from the file for each character added, except
 that if the end of the line is reached, it functions identically to
 insertion.

\hspace*{0.3 in} The possible forms of text parameter are as for Insert. The
\\ \hspace*{0.3 in} exclamation-mark form ("O!" or just "O") again provides a
\\ \hspace*{0.3 in} direct-entry capability for a single piece of text. It is useful
\\ \hspace*{0.3 in} only in command mode, since data-entry mode provides that
\\ \hspace*{0.3 in} capability all the time.

 The failure condition is the same as for Insert.

\subsection{Substitute TEXT \hspace{0.7 in} S}

 The Substitute command causes the text matched by an earlier Find (or
 Uncover or Verify) to be deleted and the text specified as parameter
 following the "S" to be inserted.

\hspace*{0.3 in} The operation of substitution involves two text strings, one to
\\ \hspace*{0.3 in} be removed, the other to be inserted. In ECCE the first of these
\\ \hspace*{0.3 in} is established by one command, typically a Find, and the second
\\ \hspace*{0.3 in} is specified as the parameter to Substitute. Thus, for example,
\\ \hspace*{0.3 in} "F/this/ S/these/" will alter the first occurrence of "this" to
\\ \hspace*{0.3 in} "these". One advantage of splitting the function between two
\\ \hspace*{0.3 in} commands is that they can be issued independently and the effect
\\ \hspace*{0.3 in} of the Find checked before giving the Substitute.

 Substitute fails if the last positioning action was not a Find, Uncover
 or Verify, or the effect of inserting the text would exceed the maximum
 line length permitted by the Editor.

\subsection{Get TEXT (one line) \hspace{0.4 in} G}

 The Get command causes the text specified to be inserted as a complete
 line above the current line. The file pointer is moved to the start of
 the current line if it is not already there, but this remains the
 current line.

\hspace*{0.3 in} The Get command is the way in which complete lines are inserted
\\ \hspace*{0.3 in} in a file. The most frequently used form is "G!" (or "G"). In
\\ \hspace*{0.3 in} this case the text is not embedded in the command as a text
\\ \hspace*{0.3 in} string, but is requested when the Get is executed by the Editor.
\\ \hspace*{0.3 in} A repeated Get expects a fresh line each time; it does not cause
\\ \hspace*{0.3 in} the first line typed to be inserted again. Thus "G!5" (or "G5")
\\ \hspace*{0.3 in} causes five lines to be requested and inserted, in the order
\\ \hspace*{0.3 in} typed, above the current line.

 The Get command fails if the line typed in starts with a colon.

\hspace*{0.3 in} The failure condition is an arbitrary convention, which may be
\\ \hspace*{0.3 in} used to cause a repeated Get to terminate. In particular, it
\\ \hspace*{0.3 in} permits the use of "G!*" (or "G*") to insert an indefinite number
\\ \hspace*{0.3 in} of lines (which it would be inconvenient to have to count).

\subsection{Kill \& Kill back \hspace{0.5 in} K K-}

 The Kill command "K" causes the whole of the current line to be
 deleted. The file pointer is left positioned at the start of the
 following line.

\hspace*{0.3 in} Kill does not simply erase all the characters on a line leaving
\\ \hspace*{0.3 in} it blank; it removes the line altogether. Kill followed by Get
\\ \hspace*{0.3 in} (eg "KG" or "K2G3") is a common command sequence when replacing a
\\ \hspace*{0.3 in} number of complete lines by other complete lines.

 The command fails if the file pointer is at the end of the file.

 The Kill back command "K-" causes the whole of the line before the
 current line to be deleted. The file pointer is moved to the start of
 the current line.

 The command fails if the current line is the first line in the file,
 the pointer being moved nonetheless to the start of this line.

\subsection{Erase (one char) \hspace{0.5 in} E E-}

 The Erase command "E" causes the character immediately to the right of
 the file pointer to be deleted

 The command fails if the file pointer is at or beyond the end of the
 current line.

\hspace*{0.3 in} Hence "E*" erases all characters on the line to the right of the
\\ \hspace*{0.3 in} pointer.

 The Erase back command "E-" causes the character immediately to the
 left of the file pointer to be deleted.

 The command fails if the pointer is at the start of the line.

\hspace*{0.3 in} Hence "E-*" erases all characters to the left of the pointer.

\subsection{Case-change (char) \hspace{0.5 in} C}

 If the character immediately to the right of the file pointer is a
 letter of the alphabet, the Case-change command alters it to the
 corresponding letter in the other case, so that upper is mapped to
 lower and lower to upper. Whether the character is a letter or not,
 the pointer is moved one position to the right.

 The command fails if the pointer is at or beyond the end of the current
 line.

\hspace*{0.3 in} Hence "C*" changes the case of all letters to the right of the
\\ \hspace*{0.3 in} pointer on the current line.

\subsection{Uncover TEXT \hspace{0.9 in} U}

 The Uncover command causes the first (or next) occurrence of the
 specified text to be located and all the material between the position
 of the file pointer at the start of the command and the occurrence of
 the text to be deleted. The text itself is not deleted. The search
 proceeds as for Find, except that the default scope is confined to the
 current line.

\hspace*{0.3 in} The Uncover command is applicable where it is most convenient to
\\ \hspace*{0.3 in} specify a deletion as 'up to' a particular character or sequence
\\ \hspace*{0.3 in} of characters. With an explicit scope, Uncover can delete part
\\ \hspace*{0.3 in} of the starting line, a number of complete lines, and an initial
\\ \hspace*{0.3 in} part of the line in which the string is located.

 The command fails if there is no occurrence of the text string within
 the scope of the search. In the case of the default scope (current
 line only), the pointer is not moved and the line is not changed. In
 the case of a multi-line search, failure results in deletion of all
 material between the initial position of the pointer and the start of
 the last line searched, which is where the pointer ends up.

\hspace*{0.3 in} An unlimited search can be specified by means of "U*".

\subsection{Break (line in two) \hspace{0.4 in} B}

 This command causes the current line to be split in two at the position
 of the file pointer; the second part becomes the current line.

\hspace*{0.3 in} Break creates two lines from one. One of its uses is to split
\\ \hspace*{0.3 in} lines which may have become undesirably long as a result of
\\ \hspace*{0.3 in} insertions.
\\ \hspace*{0.3 in} Break with the pointer at the start of a line creates a blank
\\ \hspace*{0.3 in} line above the current line.

 There is no natural failure condition for this command; implementations
 generally impose an upper limit on the number of times it may be
 repeated.

\subsection{Join (two lines) \hspace{0.6 in} J}

 This command causes the following line to be appended to the current
 line, that is, it creates one line from two.

 The command fails if the current line already exceeds the length
 defined as the maximum line width. In the case of failure the pointer
 is positioned at the end of the current line.

\subsection{Insert/Get back \hspace{0.5 in} I- G-}

 The commands "I-" and "G-" re-introduce material which has been deleted
 from the file, the insertion being made at the position at which they
 are executed, which may or may not be the position at which the
 material was deleted. The order of recovery is the reverse of the
 order of deletion, and, in tune with this, these commands leave the
 file pointer in front of, rather than after, the newly inserted
 material. The use of these commands at a different site from that at
 which the material was deleted is the basic technique in ECCE of moving
 blocks of text from one position to another.

 The command "I-" restores a single deleted character from the last
 alteration site in the file. The last alteration site is the position
 in the file at which a sequence of contiguous insertions and deletions
 was last carried out. All the material deleted at this site is
 eligible for insertion. It fails if there are no remaining deleted
 characters from that site.

\hspace*{0.3 in} For example, the command "I-0" brings in at any point all the
\\ \hspace*{0.3 in} text deleted at the last alteration site, and the sequence "ERI-"
\\ \hspace*{0.3 in} (Erase, Right, Insert back) reverses the order of a pair of
\\ \hspace*{0.3 in} characters.

 The command "G-" restores a complete deleted line. All complete lines
 deleted from the file at any time in the course of the edit are
 available for recovery, not just those removed at the last alteration
 site. It fails if there are no further deletions to be restored.

\hspace*{0.3 in} For example, "KMG-" (Kill, Move, Get back) reverses the order of
\\ \hspace*{0.3 in} a pair of lines.


\subsection{Overwrite back \hspace{0.7 in} O-}

 The command "O-" is an 'undo' command which can both restore material
 just deleted and remove material just inserted. It operates at the
 last alteration site in the file, irrespective of the position of the
 file pointer at the time the "O-" is executed. The last alteration
 site is the position in the file at which a sequence of contiguous
 insertions and deletions was last carried out. All the material
 deleted at this site is eligible for re-insertion, and all the inserted
 material is eligible for removal.
 Each execution of the "O-" command removes a single inserted character
 or line break and/or restores a single deleted character or line break.
 It fails if neither of these operations is possible. Hence "O-*"
 removes the effect of all the alterations at the site.

\subsection{Print \hspace{1.3 in} P}

 The Print command is used solely to achieve feedback from the Editor.
 It causes the current line to be displayed, and, if repeated, causes a
 Move to the following line.

\subsection{Next/previous unit \hspace{0.3 in} N N-}

 The Next command "N" locates the next word or matching punctuation
 symbol in the file to the right of the file pointer. If the character
 currently to the right of the pointer is a letter or digit or a space,
 or the pointer is at the end of the line, the pointer is moved to the
 beginning of the next word, where a word is defined as a sequence of
 alphanumeric characters (letters or digits) not preceded by an
 alphanumeric character. If the character is a left bracket (round,
 square or curly), the pointer is moved to the corresponding right
 bracket, taking account of nested occurrences of bracket symbols. If
 the character is any other symbol, the pointer is moved to the next
 occurrence of that symbol. In all cases, the unit located is regarded
 as having been matched by a text search (so that Substitute is valid,
 for example).

 The command fails if there is no occurrence of the appropriate kind of
 unit before the end of the file.

 The Next back command "N-" locates the previous unit in the file, a
 unit being defined as for Next (above), with the role of left and right
 brackets reversed.

 It fails if there is no unit of the appropriate kind before the
 beginning of the file.

\subsection{Query Spelling \hspace{0.7 in} Q}

 The Query command is used to invoke a check on the form of the text
 starting at the current position of the file pointer. The nature of
 the check currently implemented is a simple spelling error detection.
 This is done by comparing words with entries in a limited dictionary of
 written English.

 The command fails if the check fails. Repeated execution implies
 advancing to the next unit for checking. Hence the command "Q*" causes
 the check to be performed on successive words until one fails, or the
 end of the file is reached.

\subsection{Move to line number n \hspace{0.3 in} \#n}

 This command causes the file pointer to be moved from its current
 position to the start of the line specified.

\hspace*{0.3 in} Lines are numbered from 1 at the start of the file and the
\\ \hspace*{0.3 in} numbers relate to the current state of the file, not its state at
\\ \hspace*{0.3 in} the start of editing. If no line number is specified in the
\\ \hspace*{0.3 in} command, one is requested at the time the command is executed.

 The command is executed as a Move or Move back as appropriate, and
 fails as for Move if the line number is too big.

\hspace*{0.3 in} Note that the parameter $<$n$>$ is not a repetition count.

\subsection{Increment number by n \hspace{0.3 in} +n}

 The Increment command (plus-sign) is used to add the value specified by
 $<$n$>$ to the first number to the right of the pointer on the current
 line. For this purpose, a number is any sequence of decimal digits, or
 a single letter.

\hspace*{0.3 in} This command is most useful when it is required to adjust more
\\ \hspace*{0.3 in} than one number by a constant amount. The value 1 is understood
\\ \hspace*{0.3 in} if $<$n$>$ is omitted. The form "+-" may be used to specify a
\\ \hspace*{0.3 in} negative increment. Letters are included to cover the case where
\\ \hspace*{0.3 in} they are used to 'number' paragraphs.

 The command fails if there is no number to the right of the pointer on
 the current line, or the increment specified would take the item out of
 range.

\hspace*{0.3 in} Note that the parameter $<$n$>$ is not a repetition count.

\subsection{Adjust line length \hspace{0.5 in} A}

 The Adjust command is provided to simplify the task of maintaining a
 reasonably uniform line length within running text. In brief, it has
 the effect of breaking over-length lines and extending under-length
 lines by bringing up words from succeeding lines. The line length
 applied is as defined by the parameter WIDTH, and the left margin as
 defined by MARGIN

\hspace*{0.3 in} The detailed specification which follows is quite complicated.
\\ \hspace*{0.3 in} The main points to note are:
\\ \hspace*{0.3 in} a single Adjust will make the current line an acceptable length
\\ \hspace*{0.3 in} and leave the file pointer at the start of the (perhaps revised)
\\ \hspace*{0.3 in} following line;
\\ \hspace*{0.3 in} A* will (try to) produce adjusted lines up to the end of a
\\ \hspace*{0.3 in} paragraph, a paragraph being understood to terminate with a blank
\\ \hspace*{0.3 in} line (or end of file).


 (a) If the end of the file has been reached, the command fails with no
 effect.

 (b) If the current line (to the right of any margin) is blank, it is
 not changed and the file pointer is moved to the start of the following
 line.

 (c) If the length of the current line exceeds the defined maximum line
 length, the line is broken at the rightmost space character to the
 right of the file pointer which leaves a line not exceeding the maximum
 length, and a new line is formed from the latter part of the original
 line, with an added margin of spaces if MARGIN is non-zero. The file
 pointer is left at the effective start of the new line. The command
 fails if there is no space character satisfying the condition
 specified.

 (d) If the length of the current line is not greater than the maximum
 length, 'words' from succeeding lines are appended to the current line
 until either doing so would exceed the maximum length or a line which
 is blank to the right of the margin (or end of file) is reached. The
 latter case is a failure condition, but in all cases the file pointer
 ends up at the start of the line following the adjusted line.

\hspace*{0.3 in} For the purposes of Adjust, a word is defined to be any sequence
\\ \hspace*{0.3 in} of characters terminated by a space or end of line. Appending a
\\ \hspace*{0.3 in} word implies inserting a space plus the word at the end of the
\\ \hspace*{0.3 in} first line, and removing the word plus its terminating space from
\\ \hspace*{0.3 in} the second line (removing the whole line in the case that the
\\ \hspace*{0.3 in} word is the only word on the line).

\subsection{At column position n \hspace{0.3 in} @n}

 The purpose of the 'at' command is to enable text to be aligned to a
 particular column position. The effect is that the part of the current
 line to the right of the file pointer is aligned to the column position
 specified by $<$n$>$. This is achieved by the insertion or deletion of
 spaces to the left of the file pointer. In the event that aligning to
 the column position specified would cause the length of the line to
 exceed the defined maximum line length, $<$n$>$ is reduced to prevent this.

\hspace*{0.3 in} Columns are numbered from zero upwards, so that, for example, @40
\\ \hspace*{0.3 in} has the natural interpretation of placing text half-way along an
\\ \hspace*{0.3 in} 80-column line. Spaces to the right of the file pointer are not
\\ \hspace*{0.3 in} affected by this command, and only space characters immediately
\\ \hspace*{0.3 in} to the left of the file pointer are removed in seeking to align
\\ \hspace*{0.3 in} leftwards.
\\ \hspace*{0.3 in} Using "@" with a large $<$n$>$ has the effect of right-aligning the
\\ \hspace*{0.3 in} text following the pointer.

 The @n command fails if space-deletion fails to achieve correct
 alignment.

\hspace*{0.3 in} Note that the number $<$n$>$ is not a repetition count.

\subsection{Set Marker \hspace{1.0 in} $\hat{ }${}}

 Execution of the Set Marker command (caret or circumflex by itself)
 causes the current position of the file pointer to be noted for future
 reference
 The marker set by this command may be utilised, and cancelled, by any
 of the following commands:

\hspace*{0.3 in} the Define Macro command
\\ \hspace*{0.3 in} the Revert to Marker command
\\ \hspace*{0.3 in} the Switch Inputs command

 A marker is also cancelled if the text surrounding it is deleted from
 the file.

\subsection{Define Macro 'X'...'z' \hspace{0.2 in} $\hat{ }${}n}

 The Define Macro command (caret with accompanying number) serves to
 define one of the six text macro letters ('X','Y','Z','x','y','z') as
 selected by $<$n$>$ (1 to 6 respectively). For example "$\hat{ }${}2" is used to
 define 'Y' and "$\hat{ }${}6" to define 'z'. The effect is to define the letter
 selected to stand for the sequence of text between the set marker and
 the current position, or, if no marker is set, the text just matched by
 a text matching command. Any existing definition of the letter is
 lost, and the marker is cancelled.

\hspace*{0.3 in} Although text parameters typed within commands cannot, for
\\ \hspace*{0.3 in} syntactic reasons, contain line breaks, there is no such
\\ \hspace*{0.3 in} restriction on the definition of macro letters by means of this
\\ \hspace*{0.3 in} command, subject to an overall limit on length imposed by the
\\ \hspace*{0.3 in} implementation. However, multi-line text strings are valid only
\\ \hspace*{0.3 in} for the insertion group of commands, not for the text matching
\\ \hspace*{0.3 in} group.
\\ \hspace*{0.3 in} It is immaterial whether the marker is ahead of the current
\\ \hspace*{0.3 in} position or vice versa.


 The command fails if no marker is set and the file pointer is not at a
 matched text position.

\hspace*{0.3 in} For convenience, with a marker set, a second Set Marker command
\\ \hspace*{0.3 in} (that is, simple caret without accompanying $<$n$>$) is interpreted
\\ \hspace*{0.3 in} as Define Macro defining 'X'.

\subsection{Revert to Marker \hspace{0.6 in} =}

 The Revert command (equals-sign) has the property of restoring the file
 pointer to the position established by the last executed Set Marker.
 The marker is cancelled.

 The command fails if there is no marker set.

\subsection{Toggle Destruction mode |}

 Successive execution of this command (vertical bar) alternately enters
 or leaves a special mode of operation called Destructive mode. In this
 state, any of the movement commands may be used in a destructive sense,
 that is in such a way as to delete all the material from the starting
 position to the position after executing the move. Existence of the
 state is indicated by a special prompt.

\hspace*{0.3 in} Note that actual alteration commands are disallowed in this mode.
\\ \hspace*{0.3 in} The mode is most useful in conjunction with some of the more
\\ \hspace*{0.3 in} specialised movement commands such as Next, Cursor Down and
\\ \hspace*{0.3 in} Query.

\subsection{Switch Inputs \hspace{0.8 in} \$}

 This command is used to switch from the main file to the secondary
 input or back again. Having switched to secondary input, any of the
 location commands may be used to move about within that file, but
 alteration commands are not valid. The current position in the two
 files is independent and is preserved when a switch is made between the
 two. When this facility is used, a separate window is created out of
 the screen region used for file display, to show the current part of
 the secondary input file.

 Apart from providing the facility simply to inspect another file while
 editing, the main use of secondary input is to enable material from the
 second file to be incorporated in the first. One way of doing this is
 to Define text macros to represent pieces of text in the secondary file
 and use these as parameters for Insert after switching back to the main
 file.

 To provide a more convenient way of handling the most common
 requirements, the convention is also adopted that if a set marker is
 outstanding when a switch is made from secondary input to the main
 file, the text from the position of the marker up to the current
 position within the secondary file is immediately inserted in the main
 file.

 For example, incorporating the whole of a secondary file in the main
 file can be achieved by moving to the appropriate point in the main
 file and then giving the commands (separately or as one command line):

\hspace*{1.0 in} \$ $\hat{ }${} M* \$

 that is, Switch to secondary input, Set Marker, Move to end of file,
 Switch back to main file.

 Any marker set in the main file is cancelled on switching to secondary
 input.


\section{OPTIONS}
This section describes the various options which may be selected to
control or qualify the operation of the Editor. The initial parameters
in the list marked with an asterisk can be specified only in the command
line when the Editor is called (see CALLING THE EDITOR); that is, once
established, they cannot be changed. The others may be freely altered
at any time, by means of the Environment command "\%E"(below).

\subsection{Pre-definition file \hspace{0.3 in} *PRE}

 This Option is provided to make it possible to specify a file of
 editing commands which are to be obeyed at the outset of the editing
 session. Its main use is to permit frequently used definitions to be
 recovered from a file, but the file may contain any editing commands
 and may in fact comprise a complete edit ending with the Close command
 ("\%C"). Values for this parameter must be valid file-names. Although
 PRE may be specified at the outset only, the \%G command (Get editing
 commands from file) is available at any time.

Examples: \hspace{0.3 in} -PRE=WPPREDEF \hspace{0.3 in} -PRE=ECUU99.PROJ\_DEF1

\subsection{Terminal type \hspace{0.7 in} *TTYPE}
 The parameter TTYPE informs the Editor what type of interactive
 terminal is being used and hence defines the terminal characteristics,
 including the screen length and screen width. Values for this
 parameter are numbers in the ERCC enumeration; the default value is the
 system-defined TERMINALTYPE, and in general this should be appropriate.

Examples:

\hspace*{0.9 in} -TTYPE=12 \hspace{0.5 in} -TTYPE=13
\\ \hspace*{0.9 in} \{VT100\} \hspace{0.7 in} \{Esprit\}

\subsection{Window dimensions \hspace{0.4 in} *WTOP, *WROWS, etc}
\small\tt \begin{verbatim}* WTOP  -- window top      Default: 0        Range: 0..VROWS-1
* WROWS -- window rows     Default: VROWS-2  Range: 1..VROWS-2
* WLEFT -- window left     Default: 0        Range: 0..VCOLS
* WCOLS -- window columns  Default: VCOLS    Range: 0..VCOLS
* CTOP  -- command top     Default: WROWS    Range: 0..VROWS-2
* CLEFT -- command left    Default: 0        Range: 0..39
* CCOLS -- command columns Default: VCOLS    Range: 40..VCOLS
\end{verbatim}\rm  \normalsize 
 These parameters define the two screen regions to be used by the
 Editor. The 'top' values are in terms of row numbers ranging from zero
 at the top of the actual screen to VROWS-1 at the bottom; VROWS is
 typically 24. The 'left' values relate to columns, numbered from zero
 at the left of the actual screen to VCOLS-1 at the right; VCOLS is
 typically 80.

 The first four define the total extent of the screen region to be used
 for displaying the file being edited. The window height, as defined by
 WROWS, may be anything from one row up to the full screen height less
 two rows. A one row window obviously gives a rather blinkered view of
 the file.

 The width of the window, as defined by WCOLS, may be anything from one
 column to the full screen size. A one column window is obviously daft.

 The parameters CTOP, CLEFT and CCOLS define the position and width of
 the two-row region used for commands and reports. CTOP specifies the
 first of the two rows. The minimum width for the command region, as
 defined by CCOLS, is 40.

 Usually when the Editor is called directly by the user from system
 command level, it is appropriate for these two regions to occupy the
 full screen, but when the Editor is called from within another package
 or if the user wants to preserve other information on the screen, a
 smaller effective screen area may be specified. The Editor neither
 clears nor wittingly modifies areas outside the regions specified by
 these parameters.

 With the default values, the command region occupies the last two rows
 on the screen and the file window the remainder.

\subsection{Effective window \hspace{0.5 in} *MAXWIN, MINWIN}
\small\tt \begin{verbatim}* MAXWIN -- maximum window    Default: WROWS  Range: 1..WROWS
  MINWIN -- minimum window    Default: ?      Range: 1..WROWS
\end{verbatim}\rm  \normalsize 
 The purpose of these Options is to make it possible to control the
 volume of text which is transferred to the screen at any one time to
 show the state of the file. The number of lines used within the
 available window area is allowed to vary between the limits specified
 by MINWIN and MAXWIN. The principle is that when the focus of editing
 moves to a completely new site in the file, only MINWIN rows are
 displayed in the lower part of the available window area. During local
 manoeuvres, this minimum display is extended as appropriate up to the
 selected maximum. (What operations permit extension depends on the
 video characteristics and the position and width of the window).
 MAXWIN determines the maximum number of lines to be used for the time
 being, the remainder of the The MAXWIN parameter selects the amount of
 the file window which is to be used at the outset, the remainder being
 reserved for secondary input, or subsequent expansion through
 increasing MINWIN.

 When a secondary input file is being processed, it has its own varying
 size window at the top of the overall file display region defined by
 WTOP and WROWS, originally as determined by MAXWIN (or a default value
 if MAXWIN is zero). When a new MINWIN value is selected (by \%D or \%E),
 it alters the secondary input value if secondary input is selected at
 the time, rather than the main file MINWIN value. Whenever an
 increased minimum value is selected for secondary input, this has the
 effect of constraining the maximum size of the main file's effective
 window, and conversely.

 Where there are no performance restrictions imposed by communication or
 processing systems, the upper limit value (WROWS) is usually
 appropriate for MINWIN. The default value is chosen according to the
 system.

\subsection{Text line width \hspace{0.5 in} WIDTH, MARGIN}
 The parameter WIDTH specifies the maximum line length to be used in
 connection with the Adjust and 'At' commands (and for failure
 conditions in the case of Insert and Join).

 The initial default value is 80.


 The parameter MARGIN specifies a left margin position, which defines
 the effective start of the line. This determines where the file
 pointer is placed following a Move or Move back command, and is also
 relevant to the operation of the Adjust command. WIDTH is inclusive of
 MARGIN.

 The initial default value is zero.

\subsection{Letter-case matching \hspace{0.2 in} MATCH/NOMATCH}
 When matching text strings in the course of executing any of the
 commands Find, Delete, Traverse, Uncover or Verify, the Editor may or
 may not ignore case distinctions between letters. By default it
 ignores them. This mode of matching may be switched off by selecting
 the option NOMATCH and re-established by selecting the alternative
 option MATCH. When it is switched off, letters in text parameters are
 matched exactly as typed against letters in the file.
 The setting of this mode does not affect text parameters for the
 insertion commands, which are always inserted exactly as typed.

\subsection{Displaying pointer \hspace{0.3 in} HILIGHT/MARK}

 This parameter controls how the current position of the file pointer is
 displayed when the Editor is in command mode. The options are HILIGHT
 or MARK. HILIGHT implies use of whatever capability a video has for
 distinguishing arbitrary characters, for example, reduced or increased
 intensity, underline, or (preferably) reverse video. Its use may
 require particular switch settings or intensity adjustments on the
 terminal.
 MARK implies the technique of overwriting the character immediately to
 the left of the current position with a distinguished character
 (splodge or tilde). An additional column is inserted at the beginning
 of each line in this mode, for use when the pointer is at the beginning
 of the line. MARK is appropriate for terminals which have no means of
 highlighting individual character positions.

\subsection{Updating strategy \hspace{0.4 in} LATE/EARLY}

 The default strategy for updating the window is to do so only when the
 material in it is changed or the file pointer is moved outside it.
 Selecting EARLY causes the window to be extended or refreshed when the
 bottom line is reached rather than when it is passed. The default may
 be restored by selecting LATE.


\section{SPECIAL COMMANDS}

The most important Special command is the Close command "\%C" which is
the normal method of closing off the edit and making permanent the
changes to the file. If for any reason it is desired to ABANDON the
edit without giving effect to the changes, the Abandon command "\%A"
should be used instead. The variant "\%Ci" is used to invoke IMP syntax
checking before finally closing the file.
See also the section on MACROS for the Special commands "\%Q" (Query key
definition) and "\%K" (define Key).

\subsection{modify Environment \hspace{1.1 in} \%E}

 The Environment command "\%E" switches the Editor into a mode in
 which the various options described above may be modified. It cycles
 through the list of modifiable options displaying the current value and
 permitting an alternative value to be specifed. The RETURN key is used
 to move on to the next in the list and colon is used to return to
 editing. For a numeric option, a number must be typed to specify a new
 value; for a yes/no option any response other than RETURN or colon is
 sufficient to alter the setting.

\subsection{set Display size $<$n$>$ \hspace{0.9 in} \%Dn}

 This command provides an alternative means of setting MINWIN,
 without entering Environment setting mode. When used by itself,
 without $<$n$>$, it leaves MINWIN un-altered but re-writes the display. It
 should be used if for any reason the window has been corrupted (by an
 operator message, for example).

\subsection{set Line width/Margin $<$n$>$ \hspace{0.6 in} \%Ln / \%Mn}

 These commands provide an alternative means of setting WIDTH and
 MARGIN. The parameter WIDTH specifies the maximum line length to be
 used in connection with the Adjust and 'At' commands (and for failure
 conditions in the case of Insert and Join).

 The initial default value is 80.


 The parameter MARGIN specifies a left margin position, which defines
 the effective start of the line. This determines where the file
 pointer is placed following a Move or Move back command, and is also
 relevant to the operation of the Adjust command. WIDTH is inclusive of
 MARGIN.

\subsection{define Secondary input \hspace{0.8 in} \%S file-name}

 As an alternative to specifying a secondary input file at the time
 of calling the Editor, a command of the form "\%S" followed by a
 file-name may be given during the course of editing. This establishes
 the named file as the secondary input and switches to it. Any existing
 secondary file is discarded. In some implementations, the amount of
 information which can be added from a file specified in this way may be
 limited, compared with what can be inserted when the secondary input
 file is specified at the outset.

\subsection{Get commands from file \hspace{0.8 in} \%G file-name}

 The parameter PRE noted above permits an initial set of commands to
 be read from a file. The \%G command allows a command file to be
 nominated at any time during the course of editing, for example, to
 allow a different set of macros to be set up, or to invoke a complex
 but stereotyped sequence of editing operations.

\subsection{Put key definitions to file \hspace{0.5 in} \%P file-name}

 This command allows all the key definitions which have been made
 since the start of the current editing session to be saved in a
 specified file for subsequent recall (as PRE or via \%G). Definitions
 of control keys are represented in a coded form, using only printing
 characters.

\subsection{Wipe record of $<$n$>$ deleted lines \%W}

 The fact that the Editor retains a record of all lines deleted from
 the file, against the possibility of later re-insertion, can sometimes
 be a nuisance, since lines that are definitely not wanted again may get
 in the road of those that are. The Wipe command "\%W" causes the record
 of the last $<$n$>$ deleted lines to be lost so that they become
 irrevocable.

 It may be necessary to use Wipe in order to bring in a large amount
 of data for a secondary input file to replace a large chunk deleted
 from the main file.

\subsection{IMP syntax checking \hspace{1.0 in} \%Ci or \%CI}

 These variants of the Close command are used to invoke a check on
 the syntax of an IMP program file before it is finally closed. The
 first form (lower-case 'i') signifies that a return is to be made to
 the editor whenever an error is detected; the second form (upper-case
 'I') implies checking through the entire file without interaction.

 The dialect of IMP which the checker accepts is the agreed common
 subset of EMAS IMP80 and VAX/VMS IMP77. Some, but not all, of the
 features which are peculiar to one of these dialects are also accepted,
 in general with a "Non-standard" warning. The checker detects most of
 the faults which would be reported by the compilers, though there may
 be minor discrepancies due to organisational differences and some of
 the table limits are inevitably different. This is a novel feature and
 feedback from users would be helpful in refining it.


\section{MACROS}

The upper-case letters 'A' to 'W' and the punctuation symbols have a
fixed significance to ECCE. All the lower-case letters, and the
upper-case letters 'X' to 'Z', are available for definition as macros,
that is as abbreviations for sequences of characters. So also are the
control keys.

\subsection{Command and text macros}

 The printing keys mentioned have a significance as macros only
 within commands, since in data-entry mode or within text strings they
 stand for themselves. Any of them may be used in a position where a
 command letter is expected and may stand for any sequence or partial
 sequence of commands.

 The letters 'X' to 'Z' and 'x' to 'z' have two additional
 properties: first, they may be used in a position where a text
 parameter is required; and, second, they may be defined to stand for a
 text sequence appearing in the file being edited, or the secondary
 input file, using the Define Macro ("$\hat{ }${}") command.

 Initially the lower-case letters 'a' to 'w' are defined to be
 equivalent to their upper-case equivalents. Where command letters
 appear within a macro definition, it is sensible to use the upper-case
 form if it is intended to utilise the basic meaning of that command
 letter, lest the lower-case form should have been re-defined.


 The control keys are always interpreted as macros, in one of two
 ways, depending on how they have been defined. One form of definition
 forces interpretation of the sequence of characters for which the key
 stands as a command sequence; the other causes the use of the key to be
 equivalent to typing the characters explicitly as part of the text
 being entered. The distinction is indicated when defining one of these
 keys by using a colon to define a command sequence and an equals-sign
 to define a direct replacement sequence.

 Note that the content of a command macro is interpreted, not when
 the definition is made, but when the macro is used.

\subsection{Exclamation-mark in macro}
 When an exclamation-mark is used in place of a text parameter within a
 sequence invoked as a command macro, the effect is to cause the actual
 text parameter to be sought at the point following the macro call.
 Here again any of the forms of text parameter -- delimited string, text
 macro letter, ditto, or exclamation mark -- are valid.

\subsection{Key enquiry command \hspace{0.6 in} \%Q}

 The Special command "\%Q" is provided as a way of finding out the
 current significance of any key. It may be used as a one-shot command
 or to cause entry to Enquiry mode. The first involves pressing the key
 about which information is required immediately after the "\%Q"
 (followed by RETURN if not a control key). The second is indicated by
 typing just "\%Q" followed by RETURN. In this case the Editor continues
 to prompt for keys to be explained until a colon is typed; as before an
 immediate-action key does not require a following RETURN.

 For any basic editing command letter, a brief indication of the
 meaning of the letter is given. For a key defined as a macro, the
 current definition of that macro is printed out; for a multi-line
 sequence, only the first line is printed out.

\subsection{Key definition command \hspace{0.4 in} \%K}

 The Special command "\%K" is used to define or re-define keys. Like
 "\%Q," it may be used as a one-shot command or to enter a Key-definition
 mode. In the first case, a single definition is entered along with the
 "\%K", while in the definition mode, the Editor continues to prompt for
 definitions until a colon is typed.

 Each definition takes the form of the key to be defined followed by
 a colon or equals sign followed by the text making up the definition.
 When a control key is being defined, depression of the control key in
 the course of the definition causes an asterisk to be echoed. Use of
 the colon rather than equals-sign as separator indicates that a control
 key is being defined to stand for a command sequence rather than a
 direct replacement text string.

 To cover the case where it is realised after typing in a command
 that it could usefully have been defined as a macro, an alternative
 form of definition is provided to define the key to be the text of the
 last explicitly typed command line. This is: key to be defined
 followed by the ditto symbol (").

\subsection{Use of command macros}

\small\tt \begin{verbatim}    After the definitions

        %K x=F/basically/
        %K y=MR*I/  :

 the following equivalences would apply

        xS/actually/      ->    F/basically/S/actually/
        M-10 x T/y/ I/,/  ->    M-10 F/basically/ T/y/ I/,/
        ycomment/         ->    MR*I/  :comment/
\end{verbatim}\rm  \normalsize 
 A command macro letter may abbreviate any initial part of a command
 sequence; the last example illustrates a case where it includes the
 opening delimiter for a text string and a fixed initial part. The
 effect of typing a macro character (letter or control key) is always
 literal substitution of the sequence of characters for which it stands.

 Where a macro letter is defined to be a complete group of two or more
 commands it is always sensible to include parentheses in the
 definition, as in "\%K z=(F.error.I.**.)" rather than just "\%K
 z=F.error.I.**.", so that if a repetition count is attached to the
 macro letter, it will apply to the whole sequence and not just the last
 component (see next Section).

 The definition of one macro may include a reference to another, but
 any form of circular definition is invalid and an occurrence of any of
 the macro letters within text delimiters always stands for itself.

 One common case where temporary macros can be useful is when some but
 not all occurrences of a text string, say "max", have to be changed to
 something else, say "count", inspection being required to determine
 which. With the two definitions

\hspace*{0.6 in} \%K x=F/max/
\\ \hspace*{0.6 in} \%K y=S/count/x

 "x" can be used to find the first occurrence of "max" and thereafter
 "y" or "x" depending on whether a change is required or not.

 Macro definitions persevere until the end of the editing session or
 until the relevant key is re-defined.


\section{PROGRAMMED COMMANDS}

This section describes facilities for constructing more powerful
commands from simple commands. So far, the only form of compound
command structure introduced has been the facility to type more than one
command in a single command line, with the consequential capability of
repeating the complete sequence by subsequently typing a repetition
number instead of another command.

\subsection{Caution}

 The structuring facilities described in the following paragraphs can
 be used to carry out some quite complicated operations, but commands
 making heavy use of them tend to become rather difficult to understand.
 It is not sensible to try to devise a programmed command of any
 significant complexity while working at the terminal. Contemplation in
 tranquillity is required. Some users note in a log-book those which
 they have found useful in the past.

\subsection{Command sequences}

 Any sequence of commands may be enclosed in parentheses and treated
 as a single command. In particular this permits a repetition count to
 be attached to a sequence of commands. For example, the command
 "(F.integer.I.\%.)3" has the effect of inserting a percent sign in front
 of the next three occurrences of "integer". Compare "F.integer. i.\%.3"
 which inserts three percent signs in front of the first occurrence of
 "integer" only, and "F.integer.3 i.\%.3" which does the same in front of
 the third occurrence only. For this simple case, it would be almost as
 convenient to type the pair of commands as one command line, and then
 type a 2 to repeat it twice more, but that option would not cover cases
 where the bracketed sequence is just part of a complete command line.

 A command sequence fails when any component of it fails, so that an
 asterisk attached to a bracketed command sequence specifies indefinite
 repetition until one of the contained commands fails. As a check
 against infinite looping, a limit of 10,000 iterations is applied to
 the repetition of bracketed commands.

\subsection{Alternative command sequences}

 Another form of compound command is one providing a number of
 alternatives. This consists of two or more individual commands or
 command sequences separated by commas. Execution starts with the first
 command and if that alternative is completed without failure, the other
 alternatives are ignored. If any of the commands making up the first
 alternative fails, then the second alternative (following the first
 comma) is executed, and so forth. Only if a failure occurs on the last
 alternative is the whole compound command considered to have failed.
 For example, it might be required to include, as a component of a more
 complex command, an instruction to position the pointer at the next
 space on the line, or at the end of the line if there is no space to
 the right of the pointer. The command "(F1/ /, R*)" could be used for
 the purpose.


 Consider also the problem of interchanging two text strings, say
 "basically" and "actually", throughout a complete file. Obviously, the
 commands

\hspace*{0.3 in} (F/basically/S/actually/)*
\\ \hspace*{0.3 in} M-*
\\ \hspace*{0.3 in} (F/actually/S/basically/)*

 would end up with all occurrences of both words converted to
 "basically". One solution would be to convert all occurrences of the
 word "basically" to some unique sequence of characters, make the other
 change through the file, and finally convert the unique character
 sequences to "actually". A preferable approach, using alternative
 sequences, permits this kind of edit to be made progressively on a
 single pass through the file.

 First consider the sequence "(R,M)". Right-shift fails only when the
 pointer is at the end of a line, so that this sequence performs a
 Right-shift except at the end of a line, when it performs a Move. The
 Move, and hence the compound command, fails only at the end of the
 file. Accordingly this is a command which makes it possible to 'inch'
 through a file on a character by character basis. The case under
 consideration can be handled by expanding this sequence to include
 alternatives to test for the two text strings and make the necessary
 change, leading to:

\hspace*{0.3 in} (V/basically/S/actually/, V/actually/S/basically/, R, M)*

 This framework, using a set of Verify commands together with the
 'inching' sequence "R,M", is one that can be used for a variety of
 different requirements.

\subsection{Inverted failure condition}

 If a command, simple or bracketed, is followed by the symbol '\',
 the failure condition for the command is inverted so that successful
 execution causes a failure and unsuccessful execution does not. This
 in no way alters what the Editor attempts to do by way of carrying out
 the command, which has its customary effect, if any, except that it is
 deemed to have failed when it has not, and conversely. This curious
 effect is sometimes useful, most obviously with the Verify command.
 For example, "V.+." makes it possible (in effect) to make the following
 command conditional on there being a plus-sign immediately to the right
 of the pointer; "V.+.\" to make the following command conditional on
 there not being a plus-sign immediately to the right of the pointer.

\subsection{Cancelled failure condition}

 If a command, simple or bracketed, is followed by the symbol '?',
 any failure condition arising in the execution of the command is
 cancelled, that is, any further action is taken on the basis that the
 command succeeded. As with inversion, this in no way alters the effect
 of the command itself. For example, suppose it was required to insert
 an ampersand in front of each line in a file which started with a
 exclamation-mark. The sequence "(V/!/ I/\&/ M)*" is not adequate since
 the part within brackets will fail on any line not starting with an
 exclamation mark and cause termination of the whole sequence. It is
 only the failure of the Move which should cause failure of the
 sequence. Bracketing the Verify and the Insert and appending a
 question-mark achieves the desired effect:

\hspace*{0.3 in} ( (V/!/ I/\&/)? M)*

\subsection{Further examples}

 The examples which follow either might be useful in themselves or
 illustrate general techniques. Many such commands are not rigorous,
 but depend on the originator of the document maintaining a consistency
 of style in terms of such matters as the inclusion or omission of
 spaces.


\small\tt \begin{verbatim}(a)   (MR)*              Find first blank line
      (MR\)*             Find first non-blank line
\end{verbatim}\rm  \normalsize 
 The command Right-shift fails at the end of the line. Immediately
 after a Move, it will fail only if the line is blank. Hence (MR)*
 causes Moves to be executed until either the end of the file or a blank
 line is reached. Inverting the failure condition on R locates the
 first non-blank line, but note that a final L is required if the
 pointer is to end up at the start of the line.


\small\tt \begin{verbatim} (b) (RI. .)* E- Double-space a line
\end{verbatim}\rm  \normalsize 
 This sequence inserts a space to the right of each existing
 character (including spaces) on the line. The final E- removes the
 last space inserted, because trailing spaces can be a source of
 confusion.

\small\tt \begin{verbatim}(c)  (R* (L D/ /)* M)*   Delete trailing spaces
\end{verbatim}\rm  \normalsize 
 This command will eliminate any trailing spaces that may have crept
 into the file. On each line, the pointer is moved to the end and then
 successive attempts are made to Left-shift and Delete a space.

\small\tt \begin{verbatim}(d)  ( (RLI/ /4)? M)0    Create left margin (of 4 spaces)
\end{verbatim}\rm  \normalsize 
 The obvious command would be simply "(I/ /4M)0", but that would add
 spaces to blank lines, which is undesirable. Hence the "RL" to check
 that the line is not blank.


\small\tt \begin{verbatim} (e) F.sin.(V.sin(.,S.evil.) Replace selected occurrences
\end{verbatim}\rm  \normalsize 
 The form of this command illustrates the case where it is required
 to pick out certain occurrences of a word for alteration but not
 others. A programmer has inadvertently employed "sin" as a variable in
 a program which also makes use of the mathematical function "sin(...)".
 The command sequence locates an occurrence of "sin", then verifies that
 it is followed by a left parenthesis by "V.sin(." or else changes it to
 "evil".


\section{IMPLEMENTATIONS}

One of the objectives of the design of ECCE is that it should not be
system-dependent, but should be implementable on a range of machines.
This video version as described in earlier sections is implemented
uniformly on EMAS 2900, VAX/VMS and the Computer Science Department's
Advanced Personal Machine. The syntax checking capability is a
by-product of work on the programming environment for the APM.

The detail of some features, for example those involving naming of
files, is inevitably bound up with a particular operating system. The
performance of the editor as seen by the user is also affected by the
system, and, more especially, the mode of connection.

\subsection{Mode of connection}

The most important factor affecting editor performance is the mode of
connection of the user's terminal. In general, the more direct the
connection, the better the performance will be. ECCE has a number of
options which make it possible to exercise some control over the
frequency of interaction and the volume of data transferred.

In addition to affecting the responsiveness of the editor, an
indirect connection over the network involves an increased possibility
of unintended modification of the data stream sent to the terminal,
leading to an erroneous screen image which does not match the state of
the file. It may also rule out the use of cursor controls and function
keys.

If the screen image looks curious at any time, the "\%D" command
should be used to re-display it.

\subsection{Network Terminal Controllers}

New software on some of the Terminal Controllers on the ERCC network
provides a much improved screen handling mode which the editor uses if
available. On other TCPs, as an interim measure, interference with data
may be reduced by entering TCP Graph mode and input of control
characters may be enabled by entering Z mode. With the old TCP
software, the screen image is particularly susceptible to corruption as
a result of typing ahead; this should be avoided as much as possible.

****** \hspace{0.3 in} NB *****

In order to permit the use of Escape sequence controls, while the editor
is being run the system Attention character is changed from Escape to
Null, which is keyed by CONTROL+@. Any use of this Attention character
cancels video mode, so that it should be used only in extremis.

\subsection{Supported Terminals}

The list of terminals currently supported as videos in ECCE is as
follows (ERCC enumeration):

\small\tt \begin{verbatim}  code    terminal            highlight    part-screen scroll

   6     Perkin-Elmer Bantam      -             -
   8     DEC VT52                 -             -
  11     Visual 200            reduced         yes
  12     VT100                 reduced         yes
  13     Hazeltine Esprit      increased       yes
  15     Newbury 8000             -            yes
  20     Volker Craig 404         -             -
  21     ICL KDS7362           reduced         yes
\end{verbatim}\rm  \normalsize 

\section{ Quick Summary of ECCE commands}

This summary is not exhaustive.

\small\tt \begin{verbatim}Command format:
e :n/newfile       Edit a new file    (.n on ECSVAX)
e oldfile          Edit an existing file
e oldfile/newfile  Edit an old file into a new one.

Getting out once in:
%c                 Leave editor under control, updating the edited file
%a                 Abort from editor leaving edited file untouched

%d       %d<n>     Redraw screen.    (You can redraw it <n> lines high)

Basic editing commands:
In the summary below <n> is any number.  <n> may be 0 meaning "do it as far as
you can in that direction".        text is just an arbitrary text string.

m <n>    m-<n>     move forwards/backwards <n> lines (also <cursor down> etc.)
l <n>              Move left <n> characters in line (also use <cursor-left> key)
r <n>              Move right <n> characters in line (also use <cursor-right>)
f/text/  f-/text/  Find next occurrence of "text" (case-blind)
s/text/            Substitute "text".   Use after "find"
i/text/            Insert "text".  If /text/ is omitted, takes input from keybd.
e <n>    e-<n>     erase <n> characters forwards/backwards from cursor
g <n>              "get" i.e. insert <n> lines of text. (I inserts WITHIN line)
         g-<n>     "unkill" last <n> lines killed.   Use this to move text.
k <n>              kill (delete) <n> lines of text
u/text/            Uncover text.  Deletes up but not including "text"
b                  Break line at cursor
j                  Join lines
# <n>              Place cursor at start of line <n>


Secondary files:
%s filename        Split window and put a second (read-only) file in top window
^                  Set marker for copying text
$                  Switch between secondary and main file.  Text between "^"
                   marker and cursor will be copied across to first file.

"Video mode" commands

<enter>            Switches between...
                   COMMAND mode (ECCE takes keyboard input as commands)
                   REPLACE mode (Anything typed will overwrite what's there)
                   INSERT mode  (Anything typed will be inserted)

The next two commands emulate the video mode commands but stop at <return> or
a cursor movement.

i                  Insert. Takes typed input from keyboard
o                  Replace. Overwrites text with text from keyboard.
\end{verbatim}\rm  \normalsize 
\vspace{.75in} view:ecce printed on 16/02/89 at 20.32

\newpage
\tableofcontents
\end{document}